TYPHON STOMP 502 PRO Mini Tracked Skid Steer – 22.1 HP Honda GX690 & 10.6 GPM Hydraulics

A balanced mix of power, maneuverability and usability defines TYPHON STOMP 502 PRO. The machine combines Honda GX690 V-Twin power, a three-pump hydraulic package, triangle rubber tracks and a 40.7 in overall width for landscaping, residential construction, property maintenance and material handling through narrow access points.

Rather than focusing on a single metric, the layout supports the entire work cycle; dual joysticks and a stand-on platform provide direct control and visibility while supporting compatible hydraulic attachments.

Machine Overview & Specs

• Narrow-access size: 40.7 in overall width for gates, paths and confined work areas
• Track platform: rubber triangle tracks and full 360° pivot maneuverability
• Travel speed: a maximum travel speed of 3.4 mph
• Tank capacities: 5.33 gal fuel capacity and 9.2 gal hydraulic-oil capacity
• Operator setup: dual-joystick control from the stand-on platform, supported by a digital display and front LEDs
• Attachment support: a hydraulic system prepared for compatible attachment work including trenchers, augers and grapples
• Weight & capacity: 1,962 lb operating weight, 838 lb operating load and 992 lb maximum lifting force
• Engine: a 22.1 HP Honda GX690 air-cooled V-Twin gasoline engine rated at 3,600 RPM
• Hydraulic system: 10.6 GPM hydraulic output from a 3-pump / 3-valve package operating to 2,465.64 PSI
• Bucket: 5.33 ft³ bucket capacity
• Lift geometry: working geometry reaching 83.3 in high with a 54.7 in dump height

Practical Capability

Its design brings the major performance and operator requirements together in one practical platform. Its combination of Honda GX690 V-Twin power, a three-pump hydraulic package, triangle rubber tracks and a 40.7 in overall width is matched to landscaping, residential construction, property maintenance and material handling through narrow access points, while dual joysticks and a stand-on platform provide direct control and visibility while supporting compatible hydraulic attachments.